Excavators work in the summer, how to prevent high temperatures

How to prevent high temperature is a very important issue when excavators are working in summer. Since excavators typically work in harsh environments, high temperatures and extreme heat can cause the equipment to overheat. Due to hot weather, the engine may overheat, resulting in reduced engine performance. If not addressed in time, engine damage may result. So in response to this problem, here are some suggestions for preventing high temperature.

1. Check the cooling system

Make sure the excavator cooling system is working properly. It is very important to ensure that the cooling system of the excavator can work properly. Excavators may experience high temperatures during excavation, so the cooling system must be kept in good working order. Make sure there is enough cooling water in the cooling water tank, and replace the cooling liquid regularly.

2. Avoid overload work

Avoid overloading the excavator. Working overloaded can cause wear and tear on excavator components, increasing the likelihood of elevated temperatures. Therefore, it is very important to avoid overloading the excavator. Make sure that the load on the excavator does not exceed its maximum capacity.

3. Check and clean the cooling system

Check the exterior and interior of the radiator, remove dirt, debris and dust from the exterior and interior of the radiator, and clean the radiator fan. At the same time, the cooling fan should also be cleaned. You can use a brush or jet cleaner to clean the fan blades and fan housing. When cleaning the heat dissipation system, care should be taken not to spray water on the electrical components, so as not to cause damage to the electrical components. If you're not sure how to clean your cooling system, seek the help of a professional repairer.

4. Clean the engine surface

If you haven't cleaned the dirt on the engine body for a long time, the sludge attached to the engine body will lead to poor heat dissipation, which may cause the engine to overheat. Therefore, it is necessary to clean up the dirt on the engine body in time to ensure that the engine can work normally in a high temperature environment.

In short, it is very important to prevent high temperature when excavators are working in summer. Through the above suggestions, the possibility of failure and damage of the excavator in a high temperature environment can be improved.