How to check for water in excavators during the rainy season and how to deal with it After heavy rainfall water ingress in excavator equipment is a common phenomenon, the main reason for this type of situation is due to rainwater flooding the machine, especially in scenarios such as construction sites, where such events can easily occur. To deal with this situation, we need to take a series of correct measures to protect the equipment and get back to work in the shortest possible time. As there are many reasons for the failure of excavators, so we have to first determine whether the excavator failure is caused by water ingress, the following is to give you a compilation of equipment into the water judgment method: 1. Check whether the tyres or tracks of the machine are heavy. Excavator into the water, the tyres or tracks will be waterlogged inside, resulting in heavy tyres or tracks inflexible when the machine is driving。 2. Check whether the oil of the machine is deteriorated. After the excavator is in water, the internal lubricating oil and hydraulic oil of the machine will be affected, and the oil will deteriorate and become cloudy. 3. Observe whether the appearance of the excavator is abnormal. After water ingress, the surface of the machine will leave obvious water marks or water stains, especially at the seals and recesses. 4. Check whether the electrical system of the machine is faulty. After the excavator is in water, the electrical system is prone to malfunction, such as failure to start, control system failure and other phenomena. 5. Check whether the machine has abnormal sound. After the excavator into the water, the machine internal electrical, oil pipe and other components will produce abnormal sound, such as noise, breathing sound, etc.. Once there is a strange sound may be a more serious problem. These are the basic methods to determine whether water is entering the excavator. If the above phenomenon occurs, it is recommended that the following steps should be followed: 1. Turn off the excavator, after finding water in the excavator equipment, it should be turned off immediately. This will avoid further damage and safety hazards. 2. Check the electrical system. Water ingress may cause damage to the excavator's electrical system. Therefore, the electrical system should be checked for impact and the necessary repairs and replacements should be carried out. 3. Check the hydraulic system. The hydraulic system of the excavator is very important and water ingress may cause serious damage to it. Therefore, the hydraulic system should be checked to see if it has been affected and the necessary repairs and replacements should be carried out. 4. Replace the lubricating oil and hydraulic fluid, as water ingress can contaminate the lubricating oil and hydraulic fluid and should therefore be replaced promptly. 5. Check the filters, as water ingress may cause them to become clogged or damaged, and carry out the necessary repairs and replacements...

What is the reason for the sudden shutdown of the excavator or the failure to increase the throttle? When you are doing intense excavation work, if the excavator suddenly shuts down, it can cause you a lot of trouble. Especially in some time-critical work, this situation will lead to delays in the progress of the project, and even need to spend more time and money to repair the excavator. When dealing with flameouts and throttle failures, we need to figure out what's causing the failure. Here OTTO will sort out some reasons that may cause the excavator to stall or the accelerator cannot be added: 1. Fuel oil passage blockage: The blockage of the fuel oil passage means that some substances that hinder the flow of fuel appear in the fuel system of the engine, which causes the fuel to not flow normally into the combustion chamber of the engine. If the fuel oil passage is blocked, the fuel cannot flow smoothly into the combustion chamber of the engine, resulting in insufficient fuel supply, and the engine will stall due to lack of fuel. Moreover, the blockage of the fuel oil circuit may also cause other failures, such as oil pipe rupture, fuel injector failure, etc., thereby affecting the normal operation of the engine. 2. The air filter is clogged: The air filter element of the excavator is usually used to filter dust and impurities in the air. If the air filter element is severely clogged, the intake air volume will be reduced, the engine power will be reduced, and the engine cannot get enough air, which may cause the excavator to stall. If the air filter element is found to be blocked, it should be cleaned or replaced in time to ensure that the engine can work normally. 3. The fuel injection pump of the fuel injector is stuck: When the engine fuel injector or fuel injection pump is stuck, the fuel injector cannot work normally, and the fuel cannot enter the cylinder smoothly. This will cause the engine to fail to operate normally, causing problems such as power drop, engine overheating, and even engine stalling in severe cases. Therefore, if the engine fuel injection nozzle or the fuel injection pump is stuck, the excavator should be stopped immediately and repaired. If you need to replace the fuel injector or fuel injection pump, you should use the same parts as the original ones to ensure that the engine can work normally. 4. The pump regulator is stuck at the maximum displacement position: A stuck excavator pump regulator at maximum displacement can cause engine failure and potentially cause the excavator to stall. When the excavator is working normally, the pump regulator controls the working speed and strength of the excavator by adjusting the output power of the oil pump. If the pump regulator is stuck at the maximum displacement position, it means that the output power of the oil pump is limited to the maximum value, which will lead to insufficient engine output power, thus affecting the normal operation of the excavator. 5. Electronic thro...

The Spring Festival is an ancient festival in our country, and it is also the most important festival of the year. How to celebrate this festival has formed some relatively fixed customs and habits in the historical development of thousands of years, and many of them are still passed down to this day. clean--------OTTO Excavator Company "The twelfth lunar month twenty-four, dust and sweep the house", according to "Lu spring and Autumn" records, the Spring Festival dust custom in my country was in the era of Yao and shun. According to the folk saying: Because of the homophony of "dust" and "Chen", sweeping dust in the New Year has the meaning of "removing old and bringing forth new", and its purpose is to sweep out all bad luck and bad luck. This custom is entrusted with the hope that people desire to destroy the old and establish the new as well as bid farewell to the old and welcome the new. During the coming Spring Festival, each and every family must clean environment, cleaning all kinds of equipment, unpick and wash bedding, curtains, sweep the courtyard six Lu, Shan whisk dirt cobweb, dredging nullah and underground drains. Everywhere is permeated with a festive atmosphere of rejoicing, practicing hygiene, and welcoming the new year cleanly. Pasting Spring Festival couplets--------OTTO Excavator Company Spring Festival couplets are also called door pairs, spring stickers, couplets, pairs, peach charms, etc. It describes the background of the times and expresses good wishes with neat, dual, concise, and delicate characters. It is a unique literary form in our country. Every Spring Festival, no matter in the city or in the countryside, every household will choose a red Spring Festival couplet and paste it on the door to add a festive atmosphere to the festival. This custom started in the Song Dynasty and became popular in the Ming Dynasty. In the Qing Dynasty, the ideological and artistic quality of Spring Festival couplets has been greatly improved. All discussed. There are many types of Spring Festival couplets. According to their places of use, they can be divided into door hearts, frame pairs, horizontal drape, spring strips, and bucket squares. The "door heart" is pasted on the upper center of the door panel; the "frame pair" is pasted on the left and right door frames; the "horizontal drape" is pasted on the crossbar of the door; the "spring strip" is pasted on the corresponding place according to different contents; "Doujin" is also called "door leaf", which is square and diamond-shaped, and is mostly pasted on furniture and screen walls. Spring Festival Food Customs--------OTTO Excavator Company The night before the real Chinese New Year is called the reunion night. The wanderers who are away from home have to travel thousands of miles to come back home. The whole family has to sit around and make dumplings for the New Year. The stuffing on the leather bag, the content of the stuffing is varied, all kinds of meat, eggs, seafood, season...

What is SKA? It means that only businesses that invest more than 1million in Alibaba every year have the opportunity to become Alibaba's super VIP, that is, our ska. In order to better serve customers, our OTTO EXCAVATOR PARTS CO.,LIMITED has invested more than one million in the team and platform since 2020. As we all know, Alibaba has layers for buyers and sellers, and buyers need powerful sellers to provide better services. Only the top 3 enterprises have the opportunity to enter. Visit Alibaba's headquarters together, as well as the company's cultural organization introduction, scale and so on. Alibaba and Otto have formed a good partner, and our manager Abby has been an excellent lecturer of Alibaba in 2021.

OTTO TOP Supplier Travel to Alibaba Hangzhou headoffice,Every year, alibaba will hold study tours for excellent head businesses, and give these enterprises with excellent service quality the opportunity to enter the top three. Visit Alibaba's headquarters together, as well as the company's cultural organization introduction, scale and so on. Alibaba and OTTO have formed a good partner, and our manager Abby has been an excellent lecturer of Alibaba in 2021.

OTTO EXCAVATOR PARTS CO.,LIMITED moved to a new office. At this moment, we need to celebrate the relocation ceremony and opening ceremony of OTTO company. Jerry Wang, our boss, made a speech and welcomed our suppliers, our partners and our customers who have supported us for a long time. On behalf of all the staff, I thank you for coming. Here, we solemnly promise that we will live up to our expectations, strive to run our enterprise well, let our employees buy houses and cars as soon as possible, and let our customers and our suppliers achieve win-win results together. Our aim is to become a leader in excavator accessories. OTTO excavator ranks first in the world.

OTTO is not only a professional sales team, but also a big family with love and mutual help. We eat together, sing together and go to work together. We work happily in the atmosphere of OTTO. In such a loving team, customers must also like it!

OTTO EXCAVATOR PARTS CO.,LIMITED was honored to be invited by Isuzu headquarters of the Japanese factory to visit. Founded in 1937, Isuzu automobile company is one of the largest and oldest commercial automobile manufacturing enterprises in the world. Its products are loved by users all over the world. Isuzu's output of commercial vehicles and diesel engines ranks first in the world. Facing the coming of the 21st century, Isuzu automobile company will continue to apply excellent technology and process, develop high-tech and low pollution automobile and engine products, provide users around the world with efficient means of transportation, and jointly create a better future.